Table of Contents
Advertisement
THE BASIC CONNECTION
TV and VCR
SATELLITE
IDISH
ANTENNA
TV
7
CABLE
OR
ANY ALTERNATE
RF SIGNAL,
SUCHAS
A DIGITAL
OR ANALOG
TERRESTRIAL
ANTENNA
CABLE
OR
OFF-AIR
ANTENNA
VCR
VIDEO
How to view programming:
To watch cable TV or off-air TV programs
from an antenna
in this connection,
press
ANTENNA on the remote control
until
ANTENNA A is displayed
in the channel
banner.
To watch cable or any other alternate
RF
signal, such as digital or analog terrestrial,
press ANTENNA on the remote control
until ANTENNA B is displayed in the
channel banner.
To watch satellite
programming,
press
DIRECTV on the remote control and
channel up or down to the desired
program.
How to view your VCR:
Press INPUT on the remote control
and
select the video input (in this example,
VID1) in the channel banner. Because the
digital
decoder is in the TV, not the VCR,
digital
channels cannot be recorded. If an
off-air
antenna
is used, the VCR output
should be viewed
using one of the video
inputs.
•
If you've already set up auto tuning,
press
the VCR1 button
on your remote control.
NOTE: Viewing
a VCR while in AIR mode
may result in poor picture performance.
Instead, select System Optionsfrom
the
main menu, then select Signal Type and
select Cable.
The ANT B and ANT Ajacks can receive
|
digital or analog RF signals. The
J
illustrations here are recommended
connections in a cable environment.
I Some cable systems may require a
1
"conversion
box." If so, consult your cable
company's box tuning instructions for
details.
12
Advertisement
Table of Contents
