Table of Contents
Advertisement
FIND
YOUR
DISH
POINTING
COORDINATES
Use one of the available
methods (ZIP Code, Latitude/Longitude)
to find
your dish pointing
coordinates.
Follow these steps to obtain your dish pointing
coordinates
using the ZIP
Code of the dish installation
location:
1.
Press MENU on the remote control to bring up the Main menu.
2.
Select Assistance, then Dish Pointing.
3.
Select Enter ZIP Code.
4.
Enter the ZIP Code for the satellite
dish antenna
installation
location.
S,
Record the elevation,
azimuth,
and tilt (oval satellite dish only)
numbers below.
Elevation
Azimuth
Tilt (oval satellite
dish only)
USING
THE ON-SCREEN
SIGNAL
METER
Use the signal strength meter to determine whether or not you are
receiving a satellite signal, You can also use it to find the strength of the
satellite signal,
Follow these steps to bring up the on-screen signal meter:
1,
Press MENU on the remote control to bring up the Main menu,
2.
Select Assistance, then Dish Pointing.
3.
Select Signal Meter.
Azimuth is the side-to-side direction that
the satellite dish antenna is pointed.
Elevation is the up/down angle that the
satellite dish antenna is pointed.
Tilt is the circular rotation of the dish
itself, like the motion of a steering wheel.
The signal meter screen you see may look somewhat
different
from the one pictured
above.
78
Advertisement
Table of Contents
