Table of Contents
Advertisement
THE
ADVANCED
CONNECTION
TV, VCR, and DVD Player With Amplifier
_
SATELLITE
DISH
ANTENNA
DVD
ANY
ALTERNATE
RF
SIGNAL,
SUCH
AS
A DIGITAL
OR
ANALOG
TERRESTRIAL
ANTENNA
CABLE
OR
OFF-AIR
ANTENNA
ACCESS
[]
r
-,q
After you have made your connections,
program the TV to tune to the correct
video input channel to see and hear audio
and video from the attached component
(VCR, DVD player, etc.). Program your TV
as described in the "System Options and
Preferences" section of this book.
•
J
How to view your
DVD and VCR:
To watch the VCR in this connection,
press
INPUT on the remote control
until the
correct video input appears (in this
example, VID3). Note that because the
digital
decoder is in the TV, not the VCR,
you cannot record digital
channels.
To watch the DVD player in this
connection,
press INPUT on the remote
control
until the correct video input
appears (in this example, S-VID1 ).
VCR 1
I Some cable systems may require a
1
"conversion
box." If so, consult your cable
company's box tuning instructions for
details.
r
Please Read Before Using the Digital Audio Out Jack
This TV's optical digital outputjack
fully complies with the international
standard governing this type of jack (IEC958), and
is designed for connection to a Dolby Digital (AC-3 ®or PCM) receiver or Dolby Digital (AC-3 or PCM) decoder. Older
equipment, some of which is not fully compliant with IEC958, may not be compatible with the Dolby Digital bitstream.
Such a connection using anything other than Dolby Digital AC-3 or PCM receiver or decoder could create a high noise level,
causing damage to headphones or speakers.
*AC-3 is a registered
trademark
of Dolby Laboratory
Licensing Corporation.
1 3
Advertisement
Table of Contents
