Table of Contents
Advertisement
Ifyou connect
an S-Video
cable,
you must connect
the :_udiocables to the VIDEO I AUDIO jacks on the
"iV ÷ [}V[}
÷ VC_
back of the TV, not the VIDEO2 AUDIO jacks.
1. Connect your DVD Hayer to your TV.
A.
Connect the audio (white and red) cables to the VIDEO 2 R and L/MONO AUDIO jacks on the back
of theTVand
to the Audio Output jacks on the DVD player.
B.
If yam DVD player has Component
Output Jacks (Y, Pb, Pr), connect three video grade cables to
the Y, Pb, Pr jacks on the DVD player and to the VIDEO 2 Y, Pb, Pr jacks on the back of the TV. If
your DVD player doesn't have Y, Pb, Pr jacks, go to C.
-aR-
C.
If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO IN jack on the back of the TM If 'four DVD player doesn't have an
S-Video jack, go to D.
Note: If you connectan S-Videocable you must connect the audio cables to the VIDEO1AUDiOjacks on the backof the
71/,, not the VIDEO 2 AUDlO}aeks.
-at-
D. Connect a video cable (yellow) to the Video Output Jack orl the DVD player and to the VIDEO 2
VIDEO jack on the back of the TV.
2. Connect your TV to your VCR
Connect a coaxial cable to theTVANT
lack on 'four TV and to the Output Jack on 'four VCR
(sometimes labeled OUT TO TV).
Note If your VCR has A/Voutput]aek& you can connect your 71/to your VCRusing audio/video cables for better qualit/
30 Make sure cable or antenna
is connected
to your vet.
Connect the coaxial cable from 'four cable outlet or antenna to the antenna input on the VCR.
Go to page 7
4
Grophic_ contained
within thi_ public{_tion {_re for representr_tion
onl_
Chapter 1
Advertisement
Table of Contents
