Table of Contents
Advertisement
ADVANCED
CONNECTIONS
Advanced
connections
give you better sound and video by separating
the audio and video signals and enable you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
Once you have
made your connections
you will want
to program
the TV to tune
to the correct Video
INPUT channel
in
order to see and hear audio
and video
from the component.
You will program
this later in the Interactive
Setup.
Back of the
TV
The diagram
below describes each of the back panel jacks. When
connecting
AN cables, be sure to connect corresponding
OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Input 1
Connect any of the following
components:
• VCR
• Internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite
Receiver
To view the component
connected
to Input 1:
Use the WHO•INPUT
button
on the remote.
Input 2
Connect any of the following
components:
• VCR
• Internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite
Receiver
To view the component
connected
to Input 2:
Use the WHO•INPUT
button
on the remote.
r
S-Video
This optional
connection
can
be used for
better video
quality picture.
\
INPUT 1
Audio Outputs
Connect to an audio receiver or
amplifier
for variable controlled
or fixed level stereo output.
INPUT 2
VIDEO
R--AUDIO--L
S-VIDEO
CablelAntenna
Takes the signal input from a cable,
cable box, or an off-air
antenna.
Can also
be used for basic component
connections.
Ib
S-Video
his optional
connection
can
e used for better video
quality
picture.
G-LINK
Connect the G-LINK cable
for one-button
recording
and channel tuning from
the Guide.
6
Advertisement
Table of Contents
