Table of Contents
Advertisement
STEP 4: PLUG IN THE TV
Plug the end into the wall outlet,
matching
the wide blade of the plug
with the wide slot in the outlet.
Be sure to insert the plug completely.
STEP 5: PLACE BATTERIES
IN REMOTE
•
Remove the battery
compartment
cover from the back of the
remote.
•
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
•
Replace the cover.
STEP 6: TURN
ON THE TV
Press TV on the remote,
or press POWER on the TV itself.
Pressing the TV button
not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN
PROGRAM
GUIDE
The TV is designed to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button
on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold System). For more
information,
see "GUIDE Plus+ Gold System " on page 44.
To get out of the Guide:
•
Press OK to exit the Guide and tune to the highlighted
channel.
•
Press GUIDE to exit the Guide and tune to the channel displayed
in
the View window.
•
Press CLEAR to exit the Guide and go to the last channel you were
watching.
DVD
VCR2
AUX SAT'CABLE
SOUND
GO
BACK
MENU
CLEAR
m TV
STEP 7: PROGRAM
THE TV
Proceed to the next section, Interactive
Setup. The interactive
setup
routine
walks you through
the steps needed to fully configure
the TV.
The first steps ask you to select your preferred
language for the menu
system and to begin the auto channel search, which puts available
cable
TV or antenna
signals into the TV's memory.
r
Projection TV Only.
If the picture
appears
to have a double
or
triple
image
or if you notice
rings or halos
around
objects,
you may have to adjust
the
color convergence.
Details
can be found
under
the Screen menu
heading
in the
Features
and Menus
section
of this manual.
10
Advertisement
Table of Contents
