Table of Contents
Advertisement
Date and/or timeor
titlewere recorded
ontape
Date and/or timeare
incorrect
Viewfinder turns off
and on
Camcorder
does not
turn on and/or
function buttons
will
not operate
•
Displays are recorded on tape whenever they appear
in the viewfinder or on the LCD monitor. Remove
them from the viewfinder or LCD monitor when
recording. See pages 20-21.
•
When @ DATE or @ TITLE is selected, the display
is automatically recorded when you begin recording
or change the cassette. Seepages
20-21.
•
Title is recorded whenever it appears in the viewfinder
or on the LCD Monitor. Press the TITLER button to
remove the title from the viewfinder or LCD monitor.
See pages 38-40.
•
Date or time may need to be set. See page 20.
•
Clock lithium cell battery may need recharging.
See page 21.
•
LCD monitor
is open at least 45 °. Viewfinder
automatically
turns off. Monitor
closed,
viewfinder
turns on.
•
During recording,
viewfinder
turns on when monitor
rotated
around to face the subject.
•
During playback,
viewfinder
turns off when monitor
rotated
around and placed against camcorder.
Remove the power source.
After one minute press the
reset switch gently using a
nonmetallic pointed item,
such as a toothpick, until
you feel a click. This
resets the camcorder to the
factory settings and erases
the date, time, and custom
settings. Wait for at least
one minute after resetting
the camcorder to attach a
power supply.
Reset
Switch
60
Advertisement
Table of Contents
