Car Cord Adapter - RCA CC4352 User Manual

Use the RCA Optional Car Cord Adapter
The optional DCC096 car cord shown on
page 50 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. it converts
12-volts to a 9.6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC096 for
complete operating instructions.
Use the DCC096 Car Cord Adapter
1.
2.
3.
4.
5.
O/./Cigarette
Lighter
Socket
Set the CAMERA/OFF/VCR switch to
OFF to turn off the camcorder.
If the battery or DC cable is attached
to the camcorder, remove it.
Insert the small plug on the car cord to
the DC IN 9.6V jack located on the
back of the camcorder.
Take the vehicle's cigarette lighter out
of the socket.
Insert the car cord's cigarette lighter
plug into the vehicle's cigarette lighter
socket.
DC IN 9.6V
Jack
.
To turn on the camcorder, press and
hold the small button on the
CAMERA/OFF/VCR switch while you
set it to CAMERA.
Notes: The vehicle does not have to be
running for the camcorder to operate from
the DC car cord.
The battery level indicator has no meaning
when you use the car cord to power the
camcorder.
17