Table of Contents
Advertisement
INDEX
Indicator
Press the DISPLAYbutton
to display this
indicator when the camcorder is placing
an index mark on the tape. Details are on
page 28.
Status Displays
The following
displays
appear to tell you
the status of the camcorder.
•
The REC indicator appears during
recording.
•
The _.P.indicator appears when the
camcorder is fast-forwarding.
•
The '11 indicator appears when the
camcorder is rewinding.
The
indicator appears during
record-pause.
Tape Counter
with Memory
Stop
(O000M)
Press the DISPLAY button to display the
tape counter. The tape counter helps
locate segments of tape.
•
Memory stop is turned on whenever
the tape counter appears.
•
Details are on page 36.
Tape Warnings (TAPE, NO TAPE, and
TAPE END)
•
TAPE flashes when you try to record
with the safety tab removed.
•
TAPE flashes when a damaged tape is
inserted. Remove the tape and replace
it with a new one.
•
NO TAPE flashes when you try to
record with no cassette
inserted.
•
TAPE END flashes when there is
approximately
five minutes
of
recording
time left on the tape.
•
TAPE END briefly appears
when you
reach the end of the cassette when
you're recording.
Time and Date Display
Press the DATE/TIME
button to display
the time and date, AUTO
date, auto
TITLE, date only, or no date when the
camcorder
is in record-pause.
•
These displays
are recorded
on the
tape when they appear in the
viewfinder
or on the LCD monitor.
•
Details
are on pages 20-21.
Tape-Remaining
Indicator (_l)
Press the DISPLAY button to display the
tape-remaining indicator. This display
shows the approximate amount of tape
left for recording or playback. Details are
on page 27.
H
Zoom ( t )' ZOOM,
and LZOOM
Indicators
zoom indicator
( t ) appears
The
when you use the power zoom
buttons
(Tand
W).
•
ZOOM appears
when you zoom with
the Tbutton
more than 16 times.
•
I.ZOOM
appears
when you press the
INST. ZOOM button to immediately
enlarge
the picture
1.5 times.
•
Details
are on page
29.
25
Advertisement
Table of Contents
