RCA 20601 Owner's Manual page 11

Using Your TV and Remote
With VCRs: Setting the VCR1 Channel
The VCR 1 Channel works with VCR1 button on the remote. With your
VCR connected to the CABLE/ANTENNA connector on the back of the TV,
you will select channel 3 or 4 to match the setting of the Channel 3/4 switch
on the back of the VC1L Pressing VCR1 turns on the VCR and TV and tunes
the TV to see the VCR picture. If you want to turn this feature off, set the
VCR 1 Channel to Disable.
1. Select the Setup Menu
Controls Alarm
13
A. Press TV to set the remote to
control the "IV.
B. Press MENU to select the Setup
menu.. This menu is white.
2. Highlight VCR1 Channel
Alarm Ad
13
A. Press CHANNEL down to
highlight the VCR 1 Channel.
B. Press + to highlight the channel.
3.
Enter channel number
13
Controls Alarm Ad
A. Enter channel 03 or 04. Press
CHANNEL down until
"Disabled" is displayed to turn
the feature off.
B. Press DONE.
4.
Press DONE