Duplicating A Video Tape - RCA T09085B User Manual

DUPLICATING A VIDEO TAPE
if you connect the TVNCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
CONNECTIONTO ANOTHER VCR
PLAYBACK VCR
RECORDING TV/VCR
AUDIONIDEO CORD (NOT SUPPLIED)
Press the INPUT SELECT button twice to
select AUDIO/VIDEO input position. The "LINE
2" will appear on the screen.
INPUT SELECT
NOTE: You can also use the rear AUDIO/VIDEO IN
Jacks. Select "LINE 1" by pressing the INPUT
SELECT button, j
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
camcorder dubbing hook-up is shown below.
PLAYBACK
CAMCORDER
AUDIONIDEO CORD
(NOT SUPPLIED)
RECORDING TV/VCR
To VIDEO/AUDIO IN _
Press the REC/OTR button
on the remote control of the
TV/VCR, then press the
PAUSE/STILL button.
REC/OTR PAUSE/STILL
Press the PLAY Button on the
playback VCR, then press the
PAUSE/STILL button.
PAUSE/
STILL
Press the PAUSE/STILL
buttons on both units
simultaneously to begin the
duplicating process.
PAUSE/
PAUSE/STILL STILL
%%
NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
• Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.