Timer Recording - RCA T09085B User Manual

TIMER RECORDING
Timer recording can be programmed on-screen with the remote control. The built*in timer allows automatic
unattended recording of up to 8 programs within 1 month.
EXAMPLE: Program a timer recording for 23rd day, channel 007 (CATV), 7:00 - 9:30 PM (Tape speed : SLP)
• Load a video cassette with the erase prevention tab intact. The TVNCR will automatically turn on.
• Set the TV/CATV selection to the appropriate position. (see page 23.)
• See page 9 and 10, REMOTE CONTROL operation.
Press the MENU button.
MENU
%
Check the TIMER REC SET option is selected,
then press the ENTER button.
ENTER
%
E \/MENU ]
-I TIMERRECSET
/I_TV SET-UP
I CH SET-UP
I AUTOREPEAT ON K)FF
| SYSTEMSET-UP
(÷/_ENTER/MENU)
J
Press the SET/TRACKING + or - button to
select the PROGRAM position, then press the
ENTER button.
-- SET/TRACKING + ENTER
Press the SET/TRACKING + or - button to
select the date, then press the ENTER button.
-- SET/TRACKING + ENTER
.......... I ]
:<ii;i S,AR_ ,_,_OAM
END -- : -
CH 0i2
2i;:E sP E0 sP
N C L/ (+/HENTERfCANCEUMENU)
NOTES: • If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention
tab, the Timer Recording is not possible. If a tape without an erase prevention tab is in the TV/VCR, the
tape will be ejected.
• To record from the external equipment press the SET/TRACKING + or- button repeatedly until % 1 (from
AUDIO/VIDEO IN jacks on the rear)" or "L 2 (from AUDIO/VIDEO IN jacks on the front)" appears when
setting the channel in step 5. A'_
i.1,_]1