ANTENNA CONNECTIONS
If you are using an indoor or outdoor antenna (outdoor antenna not included), follow the instructions below
that correspond to your antenna system. If you are using a cable TV service (CAW), see page 14 for Cable
TV connections.
Combination
VHF/UHF
Antenna
(Single
75 ohm Cable or 300 ohm Twin-lead
Wire)
•
-_
Connect the 75 ohm Cable from the Combination
Antenna
Antenna
Jack
Jack
VHF
UHF
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
VHF/UHF Antenna to the Antenna Jack.
If your Combination
VHF/UHF Antenna has a 300 ohm
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer
may be necessary.
Combination
VHF/UHF
Antenna
(Separate VHF and UHF 300 ohm Twin-lead Wires)
Antenna
300-75 ohm
Jack
Matching
vH_F_) )
Transformer
UHF 300 ohm
_
/
VHF 300 ohm
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Trans-
former. Attach the Transformer
to the Combiner, then
attach the Combiner to the Antenna Jack.
Separate
VHF/UHF Antennas
(75 ohm VHF Cable and 300 ohm UHF Twin-lead
Wires)
•
-_
Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the Combiner. Attach the Combiner
Antenna
to the Antenna Jack.
Jack
12