Table of Contents
Advertisement
CHOICE
LISTS
Choice lists are used to choose a particular
setting
from a list of settings.
1.
Point to a choice on a menu and press MENU or OK to select that
choice.
Now that you know how to access the menus and adjust the control
panels, the following
pages provide a brief explanation
of all the menu
features.
The features are organized
in order of their
location
on the
Main Menu.
AUDIO
MENU
Mute
Press OK to reduce the TV's volume to its minimum level. Press
OK again to restore the volume.
Tone Controls
Displays the slider controls for adjusting
the TV's treble,
bass and balance.
Audio Processor
Displays a choice list of available
audio modes, which
control
the way the sound comes through
your speakers.
Mono
Plays the sound in mono only. Use this setting when
receiving
broadcasts with weak stereo signals•
Stereo
Splits the incoming stereo audio signal into left and right
channels• Most TV programs
and recorded
materials
have stereo
audio. The TV displays the word STEREO when you tune to a
program
that is broadcast in stereo.
Sound
Logic
TM
Stereo
Sound
Logic technology
monitors
a
program's
audio
track
and limits volume
excursions
to a minimum
and maximum
volume
range
from
the current
volume
setting.
Acting
like a dynamic
range,
it compresses
to limit sudden
volume
increases,
like when
a commercial
comes
on.
Second Audio Program
(SAP) Plays the program's
audio in a
second language, if one is available. The "IV displays the word SAP
when you tune to a program that is broadcast with SAP
information.
SAP audio is broadcast in mono. SAP is also used to
broadcast a program's audio with descriptions of the video for the
visually impaired.
3O
Advertisement
Table of Contents
