Table of Contents
Advertisement
Using
How to Use Your TV's Menu System
You use lhe buttons on the remote or the front of your "IV to access the menu system and
make changes to the settings.
The following pages explain how to use the different types of menus to adiust the features of
your "IV.
Tip
Feel free to explore the menu system. If you're ever
unsure where you are in the menu system, or you're
just plain tired of exploring, press CLEARto remove
the menus from the screen and start over again.
Menus
The first menu is called the Main menu. Press MENU on the remote or on lhe
front panel to bring up the Main menu. Note that holding MENU for 2 seconds
displays the GUIDE Plus+ system.
Menus take you to another menu or a control panel. There are two ways to
select a choice in a menu:
•
Use your arrow buttons
on your remote control to highlight your choice,
and press OK.
•
Press a number button on the remote. For example, in the Main menu press
3 to go straight to the Screerz menu.
Exiting a menu
There
are three ways
to exit
a menu:
•
Highlight Erit and press OK.
•
Press 0 on the remote.
•
Press CLEAR. The on-screen
displays are cleared from the screen and you
return to TV viewing.
Audio Menu
Mute
Press OK to reduce the "lW's volume to ils minimum level. Press OK
again to restore the w)lume.
Tone Controls
Displays the slider consols
for adjusting the TV's treble, bass
and balance.
Audio
Processor
Displays
a choice
list of available
audio
modes,
which
control
the way the sound
comes
through
your speakers.
You can also access
the AUDIO PROCESSOR
menu
by pressing
the SOUND
button
on the remote.
Mono
Plays the sound
in mono
only.
Use this selling
when
receiving
broadcasts
with weak
stereo
signals.
Stereo
SpliLs the incoming stereo audio signal into left and right channels.
Most TV programs
and recorded
materials have stereo audio. The word
STEREO appears on the "IV when you tune to a program
that is broadcast
in
stereo.
48
Advertisement
Table of Contents
