Table of Contents
Advertisement
The choices for each screen are:
Not Connected
Choose this if you do not have a component
connected to an antenna or video input on the back of the TV, or if
you don't want the TV to tune to a channel when the particular
component
button
is pressed.
Channel
2 (SATICable only)
Choose this if your component
is
connected to the antenna jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component's Ch 2/3/4
switch is set to channel 2.
Channel
3 Choose this if your component
is connected
to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 3.
Channel
4 Choose this if your component
is connected to the
antenna jack on the back of the "IV, and you want the TV to tune to
channel 4 when you press the specified component button.
Reminder: Make sure the component's
Ch 3/4 switch is set to
channel 4.
Video I Input
Choose this if your component
is connected
to the
INPUT1 jacks on the back of the TV and you want the TV to tune to
VlDI(SVlD1
if you used an S-Video cable) input channel when you
press the specified component button.
Video 2 Input
Choose this if your component is connected to the
INPUT2 jacks on the back of the TV and you want the TV to tune to
VID2 (SVlD2 if you used an S-Video cable) input channel when you
press the specified component button.
TIME
MENU
Sleep Timer
Displays a control
panel that lets you select the amount
of time you want to give the TV before it shuts itself off.
Schedule
Displays a control panel that lets you set up a schedule for
turning the TV on and off automatically.
Make sure to turn the
schedule
On. The on-screen directions
guide you through
the steps
needed to set the schedule.
Set "l'ime
Displays a control
panel that lets you enter the current time.
The on-screen directions
guide you through
the steps needed to set the
time. If your Guide Plus+ Gold system is setup and running
then it will
automatically
update your time and this option will not be available.
36
Advertisement
Table of Contents
