Table of Contents
Advertisement
Step l: Unpack the Box
The following
items come packed in the box:
•
VCR
•
Remote control
•
RF coaxial dable
STEP 2: Install Batteries
in the
Remote
Control
Follow these steps whenever
you need to install or change the
batteries in your VCR remote.
1.
Remove the cover of the battery compartment.
2.
Place batteries in remote,
matching
the + and - ends of each
battery to the diagram
inside the compartment.
3.
Replace the cover.
STEP 3: Connect
Your VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR's ANT. IN and RF OUT jacks for
a good signal as shown.
If you have a TV with AUDIO/VIDEO jacks, use the audio/video
jacks on the TV and VCR for a better connection.
Refer to the
Connections
section, toward the back of the manual.
VCR
TV
CABLE. CABLE BOX OR_ANTENNA
_
RFOUT,
4
Advertisement
Table of Contents
