GE VGS320 User Manual page 7

STEP 4: Plug in the VCR
Match the wide blade of the plug with the wide slot in the
outlet or adapter. Be sure to insert the plug completely. If you
are using an adapter, make sure that both the plug is inserted
completely in the adapter and the adapter is inserted
completely in the outlet.
STEP 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 orthe TV's video input.
• If you connect your VCR using the ANTENNA connectors
with RF coaxial cable, set the 3 CH. 4 switch to channel 3 or
channel 4--the channel you want to use on your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV's video input to see the
signal. See the TV Owner's Manual.
STEP 6: Turn on the VCR
Press POWER to turn on the VCR.
STEP 7: Access the Menus
The MENU and number buttons let you access, select and
change menu items. For example, to change the Auto Play
setting, you would do the following:
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4
Channels
5 Preferences
6 Language
0
Exit
VCR Viewing Channel
When using the ANTENNA jacks to
connect your VCR, tune your TV to
channel 3 or 4.
When using the audio/video jacks to
connect your VCR, tune your TV to the
TV's video input.
5