Table of Contents
Advertisement
C
MENU SELECT Programs the CD changer to play up
to 32 tracks in any order you choose.
Number Buttons Let you enter numbers when
needed.
PAUSE
Pauses the CD.
PLAY Playsthe CD.
RESET.REP Repeats a track, a CD or an entire
program. Press once to repeat the currently playing
track, twice for the CD or program, and three times to
turn the function off.
REV Moves backward through the CD one track at a
time.
STOP Stops the CD from playing.
TAPE DECK CONTROLS
FWD Fastforwards the tape.
Number Buttons Let you enter numberswhen
needed.
PAUSE Pauses the tape.
PLAY Plays the tape.
POWER Turns the tape player off.
REV Rewinds the tape.
TAPE Turns on the tape player and puts the remote in
tape player mode.
LASERDISC
PLAYER CONTROLS
CH + and CH - Changes to the next higher or lower
chapter on the laserdisc.
FWD
Scans forward
on the laserdisc.
LD.VCR2
For some laserdisc models, if programmed,
turns on the laserdisc player and puts the remote in
laserdisc mode.
Number Buttons Let you change to a specific
chapter.
PAUSE
Pauses the laserdisc.
PLAY Plays the laserdisc.
PLAYLIST For some laserdisc models, if programmed,
programsto playbackchapters on laserdiscin a certain
order.
POWER Turns the laserdiscplayer off.
REV Scansbackward on the laserdisc.
STOP Stops the laserdisc.
PROGRAMMING
THE
UN IVERSAL REMOTE
You can program the remote to control most brands of
remote controllable
TVs, VCRs and cable boxes. If you
have an RCA, GE or ProScan VCR, you may not need to
program
the remote at all. Other manufacturer's
brands need to be programmed.
PROGRAMMING
THE REMOTE
TO CONTROL
A TV
To determine whether you need to program the
remote, turn on the TV, point the remote at the TV's
remote sensor and press TV. Then, press the POWER,or
CH + or CH - button to see if the TV responds to the
remote commands. If not, you need to program the
remote.
Follow these stepsto program your remote to control
your TV:
1.
Turn on the TV.
2.
Look up your TV brand and code number(s) in the
code list on the next page or on the code sheet
packed with your remote.
3.
4.
5.
6.
Pressand hold the TV button on the remote.
Enter the three-digit code from the code list.
Releasethe TV button, then press POWERto see if
the TV responds to the remote commands. If not,
try pressing TV
then POWER.
Repeat steps3 through 5 using the next code listed
for your TV brand until the TV responds to the
remote commands.
I If you have questions about the use of the remote
|
buttons with another component, refer to the
J
component s user s guide.
19 ¸
Hide quick links:
Advertisement
Table of Contents
