Zero Search; Blank Search - RCA T25061GY User Manual

_J_lT|lmn=_Brl_ RIJUr_
Using the Playback Features
Zero Search
This feature allows you to quickly return to a time counter
reading
of 0._0:00. This is especially convenient when you want to watch a
segment of the tape several times.
I. Insert the prerecorded tape. Press STOP.
2. Press DISPLAY twice to display only the time counter.
3. Use PLAY, FF, or REW to locate the start of the segment you
want to repeat.
4. Press CLEAR to reset the lime counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the
end of the segnumt you want to repeat.
6. Press SKIP/SEARCH twice to display the ZERO SEARCH screen.
The current time counter is displayed.
7. Press REW to return to 0:.00:00. The time counter is displayed in
the upper right comer of the screen during the search. If the
current time counter has a minus in front of it, press FF.
ZERO SEARCH
Current tape counter _s
0:1Z:34
Press REW to go to
0:00:00
Press SEARCH to exit
m
ZERO SEARCH
Current tape counter 4s
-0:12:34
Press FF to 9o to
0:00:00
Press SEARCH to exit
Blank Search
The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
1. Insert the prerecorded tape and press STOP.
2. Press SKIP/SEARCH three times to display the BLANK SEARCH
screen.
3. Press FF to begin searching for a segment of atleast six secondsof
blank tape.
If a blank area is not found, the messageSearch completed-end
of tape appears.
4. PressSTOP to stop BLANK SEARCH.
BLANK SEARCH
Press FF to begin
searching for blank
sect4on of tape.
Press SEARCH to exit
17