Table of Contents
Advertisement
To Use the
Playback
Features
Zero
Search
This feature allows you to quicMy return to a time counter reading of 0:00:00.
This is convenient when you want to watch a segment of the tape several times.
1. Insert the pre-recorded tape. Press STOP.
2. Press DISPLAYtwice to display only the time counter.
3. Use PLAY,FF, or REW to locate the start of the segment you want to repeat.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the end of the
segment you want to repeat.
6. Press SKIP/SEARCH twice to display the ZERO SEARCH screen. The
current time counter is displayed.
7. Press REW to return to 0:00:00. The time counter is displayed in the upper
right corner of the screen during the search. If the current time counter has
a minus in front of it, press FF.
ZERO
SEARCH
Current
tape
counter
is
0:12:34
Press
REW
to
go
to
0:00:00
ZERO
SEARCH
Current
tape
counter
is
-0:12:34
Press
FF
to
go
to
O:OO:OO
Press
SEARCH
to
exit
Blank
Search
The TV/VCR searches for blank portions of the tape that are more than six
seconds in length.
1. Insert the pre-recorded tape and press STOP.
2. Press SKIP/SEARCH three times to display the BLANK SEARCH screen.
3. Press FF to begin searching for a segment of at least six seconds of blank
tape.
If a blank area is not found, the message Search completed-end
of tape
appears.
4. Press STOP to stop BLANK search.
BLANK
SEARCH
Press
FF
to
begin
searching
for
blank
section
of
tape.
Press
SEARCH
to
exit
21
Advertisement
Table of Contents
