Table of Contents
Advertisement
Introduction
Introduction, cont'd
About the SCP/AAP A, SCP 200, and SCP 250
The Extron SCP/AAP A, SCP 200, and SCP 250 are hardwired
remote control keypads designed for use with Extron system
switchers. Refer to the appropriate switcher's user's manual for
information on installing, operating, and setting up the
switcher.
The system switcher cannot be configured from any of
the SCP control pads. All switcher setup must be done
from the switcher's front panel or via RS-232.
The SCP/AAP A fits into a 3-height space (2.09" H x 3.5" W) in
an Extron architectural adapter faceplate, interface, or
distribution amplifier. It replicates portions of the
System 5cr Plus and System 7SC front panels for simple one-
input selection, display (projector) controls, and audio volume
adjustment.
The SCP 200 includes a 2-gang electrical box, and the SCP 250
includes a 3-gang electrical box. Both can be mounted in or on a
wall or furniture.
The SCP 200 replicates the display controls, input selection
buttons, and room function buttons of the System 7SC switcher.
It also accepts signals from the IR 701 remote control and sends
them to the switcher.
The SCP 250 replicates the front panel controls of the
System 7SC and it can also be used with the System 5cr Plus. It
includes all the features and abilities of the SCP 200 and adds an
audio volume control.
Features
Gray, black, or white faceplates — The SCP control pads are
offered in three shades for integration into a variety of
environments.
System expandability — The SCPs can be daisy chained
together in any combination to provide control of a
System 7SC or newer switcher from several locations.
Furniture and wall mountability — The control pads can be
mounted onto or in furniture or walls with the included
hardware (SCP 200 and SCP 250) or with optional
mounting plates (SCP/AAP A).
SCP 200 and SCP 250 feature
Label windows — For these models customized labels can be
created and inserted into the windows that are set into the
faceplates.
SCP/AAP A, SCP 200, SCP 250 • Introduction
1-2
SCP/AAP A, SCP 200, SCP 250
Chapter Two
Installation and Operation
Preparing the Site, Installing the Electrical Box
Rear Panel Connectors and Switches
Front Panel Features and Operation
Mounting the SCP to the Electrical Box
2
Installation Overview
Cabling
Testing/Troubleshooting
Advertisement
Table of Contents
