Table of Contents
Advertisement
Available languages
Available languages
• OPERATING INSTRUCTIONS
•
ECONO
COOL
Press _
during COOL mode |
to start
ECONO COOL operation.
The unit performs
swing operation vertically
in various cycle according
to the temperature
of the unit. Set temperature
is set 4°F (2°C) higher
automatically.
ECONO
COOL
Press C_
again to cancel
ECONO
COOL operation.
VANE
" Pressing _
also cancels ECONO COOL operation.
What is "ECONO COOL"?
Swing air flow (change of air flow) makes you fee! cooler than constant air flow.
So, even though the set temperature
is automatically
set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
POWERFUL
Press _
during COOL mode _
to start
POWERFUL COOL operation.
Fan speed
: POWERFUL-high
(exclusive
speed for POWERFUL
mode)
Horizontal vane
: Set position,
or downward
airflow
position
during
AUTO setting
• Temperature
cannot be set during POWERFUL
COOL operation.
POWERFUL
Press _
again to cancel POWERFUL COOL
operation.
• POWERFUL
COOL operation is cancelled automatically
in 15 minutes.
• POWERFUL
COOL operation is cancelled when the following buttons
are pressed:
ON/OFF button, FAN button, ECONO COOL button
@START
@STOP
_
Press _
or [_
during operation to set the timer.
@START
(ON timer) "
The unit will turn ON at the set
time.
@STOP
(OFF timer) " The unit will turn OFF at the set
time.
* ®÷1 or @÷0 blinks,
* Make sure that the current
time is set correctly.
Press _
(Increase) and (_
(Decrease) to set the
time of timer,
Each press increases or decreases
the set time by 10 minutes,
@START
@STOP
Press [_
or _
again to cancel timer.
Note:
.
ON and OFF timers can be used in combination.
_,t mark indicates the order
of timer operations.
.
If power failure occurs while ON/OFF
timer is set, see _
"Auto restart
function"
En-7
Advertisement
Table of Contents
