Usingvideo Mute - Mitsubishi HS-U520 Owner's Manual

Chapter3: Operating YourVCR Programming theVCRto Receive TV Channels (cont.)
Nhat type of sources are
connected to the VCR?
Indoor/outdoor ant.
mMomorlzb>_chan'nbls_::_J_q_
Now memorizins all the
stations you can receive
Channel 3
Stand
by %his may take
a few minutes
_Important:
Your choices are:
_Prosram to record
I_lJ I_l ,T-] iIl_ 1-4[ :!!-! _,) q -.1=_
OFirst Time Set-UP
[] _pj]_r[:x,] l;Eri;T'_
(ON)
OAuto
D.S.T.
(OFF)
O Auto power save (OFF)
ORF converter (ON )
0 PerfeoTape (AUTO)
OA/V Network (OFF)
_=_ENTER_o;_c_an
_ _
0
You will see the menu for automatically memorizing chan-
nels. Using the list below as a reference, press the ADJUST
buttons to select the kind of antenna you connected.
• If you are using any other cable combination, including a
cable box with an A/B switch, choose "Cable."
• If you are using an antenna that receives only over-the-air
broadcasts, such as "rabbit ears" or a roof-mounted an-
tenna, choose "Indoor/outdoor ant."
After you have selected, press the ENTER button.
O
You will see an on-screen message and the display on the
front of your VCR will show you that the VCR is memorizing
the stations you can receive. You can cancel the memorization
at any time by pressing CANCEL on the remote control.
After the VCR has programmed all the channels, the screen will
return the VCR's picture.
Automatic programming may include vacant, channels if there are
stray signals or noise on those channels. If this; occurs, you can
manually delete the channels using the procedure in the section
"Adding and deleting c:hannels."
Usingvideo mute
When you turn video mute ON, any blank section of tape, o:c any
station with a weak signal, will be replaced by a blue screen. The
sound will also be turned off. If there is a time when you would
like to try to tune in a weak station, _urn video mute OFF.
Before you begin, you should know how:
• to view the picture coming from your VCR; (see page 23)
• to use the menus. (See page 26.)
0 Press the MENU button on the remote control. The "VCR
Main Menu" appears on your TV.
Use the ADJUST buttons on the remote to select "CustomiTe
choices." Press the ENTER button.
O The "Customize choices" menu appears 0n your screen. Us_
the ADJUST buttons to select "Video mute."
O Press the ENTER button to set video mute to ON or OFF.
O Press the MENU button once to return to the "VCR Main
Menu;" press the MENU button a second time to turn offthe
menus.
3O