Playing A Tape; Playingback A Tape; Using Basic Playbackcontrols - Mitsubishi HS-U520 Owner's Manual

Playing a Tape
Now that your VCR is connected and properly set up, and you
know how to view a picture coming from your VCR, it's time to
play a tape.
This section describes:
• Playing back a tape, and
• Using basic playback controls.
Playingback a tape
Before you begin, you need to know:
• how to view the picture coming from your VCR (page 23).
(/f_/ O To play a tape, load a pre-recorded cassette.
O Press the PLAY/STOP button on the front panel or on the
remote control.
_ __ _o_____ [_- __ The VCR will automatically play the tape at the correct speed.
When the VCR reaches the end of the tape, it will automatically
rewind the tape and stop. Yc,u can stop play!rig by pressing PLAY/
STOP.
Playing a tape is also an Active A/V Network Feature. (For more
information, please see page 56.)
_Important:
If you are playing a tape on a TV using Active AV Network, your
TV screen may blank out for a fraction of a _;econd when you press
PLAY/STOP. This i,_ normal and will not harm either the TV or
VCR.
Using basic playbackcontrols
rewinding a tape
Press the REW button on the remote controi_ or on the front panel.
If the tape is stopped, you will begin rewind rag. If the tape is
playing, you will begin "reverse speed search."
fast forwarding a tape
Press the FF button on the remote control o_ron the front panel.
If the tape is stopped, you will begin fast ibrwarding. If the tape is
playing, you will be_,dn "for_ard speed search."
pausinga tape
Press the PAUSE button on the remote control to freeze the
picture on the screen.
25