Mitsubishi VS-55601 Owner's Manual page 57

Memorizing channels
TV GUIDE Plus+ users do not need to memorize cham_els for ANT-A.
_] TV GUIDE Plus+ will do this automatically. See the _ V GUIDE
I Plus+ Operating Guide. However, you should still mel_orize chan-
] nels for ANT-B if that input will be used. If you will nct be memoriz-
ing channels for ANT-B, proceed to "Setting 1:he AiV Network."
You can use the menus to automatically' memorize the channels your
TV can receive and skip the unused channels. Once channels are
memorized, you can scan through them using the channel up/down
controls on the remote control and control panel.
_--]TV Main Menu
_ First Time Setup _-_
Customize Display
[] Advanced Features
_'_Select A/V Memory
[]Guide Plus+ Menu
_ ADJUST to select
ENTER to enter
MENU to exit menus
[] Memorize Channels
[] Antenna A (Ant-A) _" 1
[] Antenna B (Ant-B)
On which input would you like
to memorize?
[_ ADJUST to select
ENTER to enter
MENU to go back
[] Memorize Channels
Indoor/outdoor
L_Jantenna
What is connected to your TV
on Ant-A?
--_ ADJUST to select
ENTER to enter
MENU to go back
[] Memorize Channels
] Channel 003 _
Not in memory
Now memorizing all the stations
you can receive on Ant-A.
Please stand by.
[_ CANCEL to stop memorization
O Press the MENU button. The
Main Menu will appear on the
screen.
Use the ADJUST buttons to select
"First Time Setup". Press
ENTER/EXCH.
At the "First Tirae Setup" screen,
use ADJUST buttons to select
"Memorize Channels". Press
ENTER/EXCH.
OUse the ADJUST buttons to select
the terminal (ANT-A or ANT-B)
to which the am:enna or cable
system is attached. Press
ENTEI_EXCH. (]:f using both
terminals, memorize channels for
one of the terminals now).
Use the ADJUST buttons to
choose the type of antenna you
connected: Cable antenna or
Indoor/outdoor antenna. Press
ENTEI_EXCH.
You will see a message that
channel memorization is in
progress. A channel being added
to memory will be labeled "In
memory". Channels not being
added will be labeled "Not in
memory". You can stop channel
memorization at any time by
pressing CANCEL.
_>Important: CHANNEL up/down controls will work differently after channels
have been memorized. After memorizing, use the channel controls
(CHANNEL) to advance sequentially to the next memorized channel.
Use the number buttons to select individual channels.
Getting Started 57