Mitsubishi VS-55601 Owner's Manual page 100

Troubleshooting (cont.)
Problem Possible Solutions For More Information
There's no sound even
when the volume is turned
up.
Check that the MUTE
button isn't on.
See Remote Control .Buttons
and Functions in Chapter 1,
which explains the location
and function of the MUTE
button.
The TV's "Listen to:" setting
may be set to "second audio
program" (S.A.P.).
See Customizing A V
Memory in Chapter 3, which
explains hew to adjust the
"Listen to:" setting.
Check that "Speaker"
setting is set to "On."
See Customizing A V
Memory in Chapter 3, which
explains how to adjust the
"Speaker" setting.
You. forget the code you used
to set the parental lock.
• Use the alternate procedure • See tile Appendix,
that doesn't require the use Procedure for Bypassing the
of the code. Parental Lock°
You can't program the TV to
turn on automatically.
° The TV may be locked. • See Using the Parental Lock
within Using the Advanced
Features in Chap_;er 3.
The sound doesn't match the
image on screen.
° The TV's "Listen to:" setting
may be set to "second audio
program" (S.A.P.).
See Customizinff A V
Memory in Chap_;er 3,
which explains how to
adjust the "Listen to:"
setting.
There is a large black or
gray rectangle on the screen.
The TV has been set to
"text" mode, but there is no
text information being
broadcast.
See Using the Closed
Caption Decoder in the
Getting Started s ec [ion of
Chapter 3, or press the
HOME button to make the
rectangle disappear.
You cannot see a picture
wken you play a tape in the
VCR.
If you connected your VCR
with A/V cables, use the
INPUT button to select the
input source (Input 1, 2, or
3) that the VCR is connected
to.
• See Selecffng the Input
Source for an explanation
about changing the input.
Troubleshooting 101