Mitsubishi VS-55601 Owner's Manual page 44

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
using your remote control to operate your cable or satellite
box
After you have set up your remote control for your particular brand
of cable or satellite box, you can use the remote to operate it.
0 Use the select switch on the remote control to choose the layer
that you set up to operate your cable/satellite box: AUDIO or
DVD.
O Point the remote control at the cable/satellite box and press the
desired buttons.
You can use the POWER, CHANNEL, numbers (0--9), and ENTER
buttons to operate your cable box. If you are using an RCA DSS or
PRIMESTAR ® receiver, you may be able to use additional buttons.
Refer to the instructions for these devices.
PRIMESTAR_ is a registered servicemark of PRIMESTAR Partnere LP.
setting up the remote control to operate your Mitsubishi
disc player or A/V receiver
0
0
Turn off your audio component.
Set the select switch on the top of the remote, to choose the
layer you want to set up. For a laser disc player, choose
AUDIO or DVD. For an A/V receiver, choose TV or AUDIO.
O While holding in the POWER button on the remote control,
enter one of these code numbers:
• For a Mitsubishi A/V receiver and compact disc player:
30, 31, 35 or 38
• For a Mitsubishi and some Pioneer Laserdisc players:
32 or 33
• For a Yamaha A/V receiver and compact disc player:
36 or 37
• For a Mitsubishi DVD player: 34
O
O
Be sure to enter both digits of the code number. If more than
one number is listed, begin with the first one.
Release the POWER button.
Press the POWER button again. Your disc player or audio
component should turn on. If it does, your remote control is
now set up to operate your audio component. If it does not turn
on, repeat the instructions above, trying the other code number
listed for your component.
See "Using Your Remote Control to Operate Your Mitsubishi
Laserdisc Player" and "Using Your Remote Control to Operate
Your Mitsubishi A/V Receiver" on the next page for informal:ion
on using the remote to operate your A/V components.
44 Chapter 3: Operating Your TV