Maytag MHW3000BG0 Use & Care Manual page 8

CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
III Not all cycles, temperatures, and options are available on all models.
III All wash temperature selections feature a cold rinse.
III Not all temperatures, spin speeds, or soil levels are labeled on the control panel.
_ Items to wash I
using default I CYCle: Wash I Spin
cycle settings: ..... lempera_ure: Speed:
Clothing, bedding Sanitize Hot Extra High
and towels requiring with Oxi t Med
sanitization Low
Small loads of
3-4 lightly soiled
garments
Normaly soiled sheets,
pillowcases, light
blankets, or throws
Sturdy colorfast
fabrics and heavily
soiled garments
Soil Ava able
Level: Options:
Rapid Wash
Bedding
Heavy Duty
Hot
Warm
Cold
Hot
Warm
Cold
Hot
Warm
Cold
Extra High
Med
Low
Extra High
Med
Low
Extra High
Med
Low
Heavy Fresh Spin"
Normal Extra Rinse
Light Delay Start
Heavy Fresh Spin"
Normal Extra Rinse
Light Delay Start
Heavy Fresh Spin _
Normal Extra Rinse
Light Delay Start
Heavy Fresh Spin"
Normal Extra Rinse
Light Delay Start
CYcle Details:
©
Using the highest wash temperature
available along with an Oxi product
added in the drum ensures
sanifization. Check recommended
wash temperature of your items
and use the amount of Oxi
recommended by the manufacturer.
For small loads (3-4 items) needed
quickly. This cycle combines high-
speed tumbling, a shortened wash
time, and an extra-high-speed spin
for reduced drying times.
The wash action of this cycle is
designed to keep large items from
tangling and bailing up.
High-speed tumbling and an extra-
high-speed final spin help provide
optimal cleaning and reduce drying
times.
t- Sanitize with Oxi
II This washer has a Sanitize with Oxi Cycle that eliminates 99.9%
of bacteria typically found on clothing, bedding, and towels, based
on independent, third-party laboratory testing. There is no carryover
of bacteria between loads after the cycle is complete.
II Use the Sanitize with Oxi Cycle to clean heavily soiled, colorfast
fabrics. This combines the hottest water temperature to help ensure
the removal of heavy soils and stains. It is recommended that you set
your hot water heater to 120°F (49°C) to ensure proper performance
during this cycle.
Load Size Recommendations
For best results, follow the load size recommendations noted for each
cycle,
_ mall load: Fill the washer drum with 3-4 items, not more than 1/4 full.
_ edium load: Fill the washer drum up to about 1/2 full.
large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes
can tumble freely. For best results, avoid packing tightly.
8