Advertisement
COFtTflOLS
AT AGLAF!CE
SELECT
CYCLE
INTELLIDRY
WRINKLE
FREE
FABRICS
WITH PRESS CARE
automatically senses the mois-
ture in the load and shuts off when the selected dryness
level is reached. It minimizes wrinkles of synthetic fabrics
such as acrylic, nylon, polyester or blends by providing an
unheated cool-down period at the end of the cycle. Simply
set the control to the desired dryness level (MORE DRY -
LESS DRY).The line between MORE DRY and LESS DRY
is the initial preferred setting for the majority of loads.
PRESS
CARE
OFF
INTELLIDRY REGULAR
automatically senses the
moisture in the load and shuts off when the selected dryness
level is reached.This cycle is designedfor loads such as tow-
els, underwear, t-shirts, jeans, etc. Set the control to the
desired dryness level (MORE DRY - LESS DRY).The line
between MORE DRY and LESS DRY is the initial preferred
setting for the majority of loads.
OFF
INTELLIDRY
MoRE DRY REGULAR
LESS DRY
COOL DOWN
LESS DRY
OFF
5O
'NTELLIDRY
MORE
DRY
WRINKLE
FREE
TIME
DRY/
OFF
AIR
FLU
FF
F A B R I C S
_o
BI1Y[:t,
WITH
PRESS
CARE
WRINKLE
RELEASE
DAMP DRY
WRINKLE RELEASE wilt
release
wrinkles from items that are clean and dry
but slightly wrinkled, such as from a crowd-
ed closet, packed suitcase or from sitting in
the dryer too long after the end of the cycle.
It provides 10 minutes of heated tumbling
and 5 minutes of cool down tumbling with-
out heat.
DAMP DRY is designed
to
"partially"
dry items. It provides approximately 20
minutes of heated tumbling and 5 minutes
of cool down tumbling without heat,
DRYELFABRICCARE
is
designed
for use on dry clean only fabrics in combi-
nation with Dryel Dry Clean Only Fabric
Care product. Placing the control dial
arrow at the DRYEL line will provide the
optimal amount of time needed to proper-
ly use Dryel. (For more information on
using the Dryel cycle, see page 7.)
TIME DRY/AIR FLUFF
may be
selected for any load if the IntelliDry sensor
system is not desired, Set the control to the
desired number of minutes.
NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a spe-
cific rate during the IntelliDry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the
load begins to dry) the dial will advance at a more regular rate and much more quickly.This is normal operation.
S
Advertisement
