Clock And Timer, If Equipped - Maytag MGR4450BDW Owner's Manual

i
The electronic clock and timer display will flash when the appliance is first connected to
power or if power is interrupted. The display will stop flashing once the time-of-day clock
has been set.
TO SET THE TIME-OF-DAY CLOCK
1. Press the CLOCK pad.
2. Press and hold the HOUR pad to set the correct hours.
Tap the pad once to change the time by a single hour.
3. Press and hold the MINUTE pad to set the correct
minutes. Tap the pad once to change the time by a single
minute.
For example: To set the clock for 3:15, press and hold the
HOUR pad until 3 appears in the hours display. Then press
and hold the MINUTE pad until 15 appears in the minutes
display.
TO SET THE TIMER
.
Press the TIMER pad. 0:59, or one hour, will appear in the
display.
The timer will automatically begin counting down in
increments of one minute.
2. To set the timer for less than one hour: Press the
TIMER pad then press and hold the MINUTE pad until the
desired time appears in the display. To change the time by
a single minute, tap the pad once.
3. To set the timer for more than one hour: Press the
TIMER pad then -
• Press the HOUR pad, 1:59, or two hours, wilt appear
in the display.
• Press the MINUTE pad until the desired minutes
appear in the display.
NOTE: Two hours is the maximum time that can be set.
4. When the time has elapsed, 0:00 will appear in the display
and continuous beeps witl sound to indicate the end of the
timing operation.
5. Press the CLOCK pad to cancel the beeps. The current
time of day wilt reappear in the display.
To cancel the timer: Press the CLOCK pad and the display
will return to the current time of day.