Software Upgrade - Philips 37PFL5332D User Manual

Hide thumbs Also See for 37PFL5332D:
Table of Contents

Advertisement

Available languages

Available languages

TV menu
Connect
Accessory
Devices
Set Top
Box to TV
Next Source
Cable Signal iN
from Cable Company
75[_ Input
Reset
AV
settings
This function
allows you to reset most of the picture and sound settings to
their predefined
factory
states.
O
Select Reset AV settings with the cursor down.
O
Press the cursor right.
Press the OK button to erase settings and reset them to their default
values.
Back of Cable Box
¢
@@@
J
L .....
TV
HDMI Input
Set-Top
Box
to TV
Software
upgrade
This menu allows you to upgrade your TV software
by using a USB
device.
USB
upgrade
It is possible to initiate an upgrade procedure
from a USB portable
memory.
The memory
device must be filled with the appropriate
upgrade
image (and structure)
which can be found on the www.philips.
corn/welcome
website.
Using
FIDMI
Remote Control
0
0
0
Connect
the RF cable from
the wall to the back of the cable box.
Set the set-top
box to CH 3 or 4 and tune the TV to the same channel.
In some cases, the cable box will automatically tune to channel 3 or 4. just
change channels until the picture appears.
Connect
the cable box to the TV by using the HDMI cable.
Note : If tfle accessory device has DVI output only, use a DVI to HDMI adapter
cable to connect to the HDMI connecton You need to also connect the audio
cable to L and R AUDlO
jacks. Next, go to Menu
=> TV menu
=>
Installation
:>
Connections
=> Audio
in LIB => AVE
Using
RF Cable
Connect
the RF cable from the wall to the back of the cable box.
Use a second RF cable to connect the cable box to the TV's antenna
input.
This connection gives mona sound, For stereo sound use also composite audio/
video connection (Refer to panel 3),
Source Bu_ton
Next
SOLII'¢ e
Using Component
Video
Input
Connect
the Component
Video and Audio cable to the back of the cable
box accordingly.
Connect
the red and white audio cables from the cable box into the
audio AV inputs of the TV.
Press the Source
button
on the remote
control
until the connected
source AV
I appears on the TV screen.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents