Maytag CRG9700C User Manual page 7

Clock Pad
Use this pad to set the time-uf-day clock. For instruc-
tions to do this, see below.
You may also press this pad to recall the current time of
day. For example, if the timer is connting down in the
display, press the CLOCK pad to return the current
time to the display. The timer will eontinue to count
down and a signal will sound when tile time expires.
Cook Time/Oven Stop Pads
These pads are used to program the oven to start and
stop automatically, either immediately or at a later time.
For detailed in_brmation on using Programmed Oven
Operations, see pages 9-10.
Self Clean Pad (select models)
This pad is pressed to set the oven for a self-clean cycle.
See pages 12 13 tor detailed information un the self-
clean tbature.
Broil Pad
Use this pad to select broil. Two heat selections are
available tot broiling--Ill and lx). Sex page 11 _br more
hroiling intormation.
Oven Temp Pad
Tile oven temperature is set by pressing this pad and
the • or • pad. Additional haking and roasting
iilfimnatiun can be fbund on pages _9.
Setting the Clock and Timer
Clock
To set the time-of-day clock:
.
2.
Press the CLOCK pad once. The words "SET
TIME" will fl_sh in the display.
Set the correct time of day ]]sing the • and • pads.
• To change the time by one ininute, press either
pad once.
• To change the time in increments of 10 minutes,
press and hold either pad.
When the power is first supplied to the range or if there
has been a power t_iilure, the display will flash. Follow
above instructions to set the clock. The clock time
cannot he changed when the oven is set for a e_k or
self-clean (select models) operation. Cancel the
operation to set the clock.
Press the CLOCK pad to recall tile time of clay when
another fimetiun is displayed.
Timer
To set the timer:
i.
2.
Press the TIMER pad once. The words "SET .....
TIMER" will flash in the display.
Set tile desired time using the • and • pads.
• Press either pad once to change the time by 1
minute (if the Timer is set tor up to 1 hour), 5
minutes (if the Timer is set l[br over 1 hour), or 10
minutes (if the Timer is set tbr over 2 hours).
• Press and hold either pad to change the time in 5
minute or 10 minute increments, depending upon
the time set in the display. :i:
Tile TIMER can be set from 1 minute (0tIR:01) up to 9
hours and 50 minutes (9 HR:50).
The timing operation will start automatically. Coloils
will flash in the display to indicate a timing operation.
One long eontiinmus heep will signal tile end of the
timing operation and "End" will briefly appear in the
displ_gv. The time of day will automatically reappear in
tile display. The TIMER pad does not control the
oven.
To cancel: Press the TIMER pad and hold h)r 3
seconds. The time of clay will reappear after a slight
delay.
PAGE 5