Redialling; Automatic Redialling; Manual Redialling - Panasonic Panafax UF-550 User Manual

Sending Documents.
Redlalling
Automatic Redialling
If the line is busy or there is no answer, your machine will redia_the
number up to 3 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
A file number is shown at the upper right comer of the display if it
is a memory transmission file.
Manual Redialling
You can also rediat the last dialed number manually by pressing the [ REDIAL I key.
To rediel the last dialed number through memory
WAIT TOOIALNo.0oz I
(Te, lephone _uKuber) I
1
<_/-_ Set document(s) face down.
Make sure that the MEMORY tamp is on.
ENTER STATION(S) i
ITNEN PRESSI,,ISTART 00%
PAUSE/
REDIAL
TEL. N0. i
5551234 ii,
4
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
Set document(s) face down.
* STORE * NO.002 i
.. PAGES=01 ?1% I
* DIALLING *
NO.002 i
5551234
IENTER STATION(S) I
THEN PRESS START?0%
_:3
M£MORY
Make sure that the lamp goes off.
ENTER STATION 00%1
PAUSe'
3 {_REDtAL
Your machine starts to dial the last dialed number.
TEL. NO.
5551234 I
I* DIALLING *
5551234 ]
[]Note: t. While the unit is displaying "WAIT TO DIAL", you can press ! REDIAL _ to start rediatling immediately.
2, While the unit is displaying "DIALL/NG" and a message is heard through the monitor that the circuits are
busy. ..... you can press[ REDIAL ] to start redialting immediately.
59