Panasonic Panafax UF-550 User Manual page 146

Journals and Lists
Explanation of Contents
(1) Printoutdate
(2) Printouttime
(3) Journalnumber
(4) Communication result
(5) Number of pages transmitted or
received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
(16) Type of communication
(17) Destination
(18) Received remote station's ID
(19) Resolution
: "OK _indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was not
printed out.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into memory for transmission but successfully stored
document(s) was sent,
"R-OK" indicates that the Relayed XMT or Confidential Communication was
successful.
"3-digit Info Code" (see page 155)indicates that the communication has failed.
: The 3-digit number is the number of pages successfully transmitted or
received,
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
001 to 255 (If the communication is stored into memory, a file number is
assigned for each communication.)
"XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
: Name : Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
number : Dialed telephone number (PIN code wilt not be shown)
Number: Remote station's ID number.
: For service personnel only
: Up to 25 characters
: Up to 20 digits
:
Up
to 16 characters
: Transmission or memory transmission
If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No.fl'efephone Number/Recorded Name
If not : Telephone number
Character ID/ID number
"STD" means standard resolution
"FINE" means fine resolution
"S-FINE" means super fine resolution
144