Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual page 13

Supplying Power
-- DC Power Cable
Connect AC Adaptor VCR DC OUT
POWER Lamp DC IN to _ with supplied
__i r D C Power C able.
Plug in AC Adaptor.
POWER Lamp lights.
Notes:
VCR DC OUT Connector • AC Adaptor cannot power Camcorder while
charging Battery.
• When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
,-.-- CAUTION: •
This unit will operate on 110/120/220/240V AC. An AC plug adaptor may be
required for voltages other than 120V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has special AC outlets.
[1_..1 il ,_]_ | (:-] iiv|ll,lo] K0| l_J_ [0] l p.11II
DC IN
Connector
\
Cigarette Lighter
So_cket (12V)
Car Battery Cord Cigarette
(optional) Lighter Plug
1
2
Connect PV-C16 Car Battery_ Cord
(optional, page 76) to Camcorder
DC IN.
A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
• If Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
Notes:
• This cord only works in vehicles equipped
with DC 1'2V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
• To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
• Running vehicles must be well ventilated.
• When not in use, disconnect cigarette
lighter plug.
13
i_ ¸ i ,_