Security Mode - Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual

Security Mode
i _TA r;_ [e]i I_-.I_H ! iil j tv
2,3,4
1
Motion Security may mistakenly start
when:
• background is plain, like a white wall, or
has distinct vertical, horizontal or slanted
stripes, like a venetian blind.
• brightness suddenly changes.
Motion Security may not start when:
• motion is very slow or fast.
• moving object is very small.
• motion occurs only in 1 comer of viewing
area.
• in poor lighting (in this case, MOTION
SECURITY flashes).
• background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
• Security recording starts if Camcorder is
bumped or repositioned.
• This feature is not available during normal
recording.
• While in Motion Security stand-by, the
following functions are not available:
Record/Pause, Stand-by mode, Digital
E.I.S., Time Lapse, Message, Auto Fade,
Digital Fade, Digital Filter.
Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 14).
• Set POWER to CAMERA.
• Securely position and aim Camcorder.
I Slide DIGITAL SELECT to EIS
Press MENU for MENU mode'
Press UP__p_& or ( • P,_E_
D _.E _s_ • o_
DOWN. to select/.ESS_E _OFF |
I m_wmm ;OFF i
==" ;°-=1
SB.ECT : PUSH VI& KEY
SET : PUSH DISPLAY
D : PUSH MENU KEY
Press _ for SECURITY
MODE menu. Press UP___A or
DOWN. to i___ s_ _OE ... ]
select I_11.
Press DISPLAY
to confirm entry. [_ uo_Au_o j
SELECT : PUSH VIA KEY
ET : PUSH D_SPL_YK
Press ME_ fqr Motion Security
stand-by mode. (If cassette is not
inserted, "1"_"_" will flash.)
II EC]
MOTION MOTION
SECURITY _ SECURITY
STAND-BY
• Recording will start about 3 seconds
after motion is detected.
• E_ate and time are recorded if
displayed in EVF (page 20).
• Recording stops 30 seconds after
motion ceases.
To cancel Security Mode, set POWER to
OFF.