Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual page 63

PC Connection
Before you begin...
• Insert the CompactFlash Card (page 51).
• Make Camcorder-PC connections (page 61).
• Turn both units on.
• Set Camcorder POWER to PHOTO.
Click on Start, then "Programs,"
then "Digital PhotoShot."
"Digital PhotoShot" is opened.
Note:
• If connection error message appears,
confirm COM Port to be used for the
connection with the Camcorder and
correct COM Port selection as follows:
a Select File
b Select COM setting
c Select the correct COM Port
d Select OK
COM PORT: COM1, COM2, COM3 or COM4
(COM1 or COM2 is usually used.)
Refer to Help for information about
application opersltion and other
Error messages,
63