Table of Contents
Advertisement
Resetting
the file name
numbers
of
Adjusting
the CCD and the image
pictures
[FILE
NAME]
processing
function
[PIXEL
MAPPING]
Folder name
DCIM
Folder name
File name
!.JPg
.jPg
Automatic
Automatic
numbering
numbering
--
Month:
1 to C
(A=October,
B=November,
C=December)
_
This function
has already been adjusted
at factory shipping,
and no adjustment
is
needed right after purchase.
Approximately
once a year is recommended.
_
For best results, wait at least one minute
after taking or viewing
pictures before
performing
pixel mapping.
If the camera
is
turned off during pixel mapping,
be sure to
perform it again.
To adjust
the CCD and the image
processing
function
Press the []
button when [START]
(Submenu 2) is displayed.
• The camerachecksand adjuststhe CCD andthe
image processing functionat the sametime.
Day: 01 to 31
AUTO
This resets the sequential number
for the folder name and file name
whenever
a new card is inserted. _1
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues
the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
The number for the folder name is reset to 100, and
the one for the file name is reset to 0001.
EN
Advertisement
Table of Contents
