NordicTrack EXP 1000i User Manual page 7

4. SlidetheGrounding B racket ( 116)ontooneofthe
Handrail Spacers (65)inthelocation shown.
Seeinsetdrawing A. Pinch eachofthetabsonthe
Grounding B racket ( 116)toallowthetabstofit insidethe
holeinthe Upright (69)(Seeinset d rawing B).
Seeinsetdrawing B.Place the Handrail Spacer ( 65)on
theleftUpright (69)asshown, w iththecutout o ntheindi-
catedside.Note:Make surethatthetabsontheBracket
areinserted intotheholeinthe Upright.
5. Pull t he Upright WireHarness (98)upthrough theother
Handrail Spacer ( 65).PlacetheHandrail Spacer ( 65)on
therightUpright (69)asshown, w iththecutout t urned to-
wardthetreadmill (seeinsetdrawing A).
Have a second person holdtheHandrails ( 66)nearthe
Uprights ( 69)asshown. C onnect the Upright Wire
Harness ( 98)tothewiresextending f romtheConsole
Base(81).Insert t heconnectors andtheWireHarness
intotheholeintheConsole Base(seeinsetdrawing B).
Being careful n ottopinchtheWireHarness (98),setthe
Handrails ( 66)ontheSpacers ( 65).
Z
)4
A
Tabs
65 _'" _ Cutout
81
6. Insert two Handrail Bushings (75) into the right Upright
(69). Turn the Handrail Bushings so they fit against the
Upright with the thick sides of the Bushings facing the
center of the treadmill, as shown in the inset drawing.
Insert two Handrail Bolts (78) with Handrail Washers
(77) into the Handrail Bushings (75), the right Upright
(69), and the right Handrail Spacer (65). Lift the right
Handrail (66) to align the Bolts with the holes in the
Handrail. Next, thread the Bolts into the Handrail (66).
Do not tighten the Bolts yet.
Attach the left Handrail (not shown) in the same way.
Tighten all four Handrail Bolts (78).
75
65
77 78
7. Make sure that all parts are tightened before you use the treadmill. Note: If there is a thin sheet of clear
plastic on the hood decal or the "ComforTrack" decal, remove it. Keep the included allen wrench in a secure
place. The allen wrench is used to adjust the walking belt (see page 24). To protect the floor or carpet from
damage, place a mat under the treadmill.