Advertisement
i¸
:
/
i:!
NOTEi This operator,s
manual may coverVari_
ous models of tillerS:
The unts illuStrated
may Varyslightly from
your unit. Follow on!y
those instructions
Whichpertain to your
model numberl
...........
NOTE: Stand behind
the tiller as if you were
going to operate it.
Your right hand cor-
respondsto the right
side of the tiller; your
left hand corresponds
:othe left side of the
:iller.
Making Adjustments
Warning: Disconnect the spark
plug wire and ground it against
the engine before performing
any adjustments.
Engine
Adjustment
Refer to the separate engine manual for engine
adjustment instructions.
Tine Width
Adjustment
The tilling width of the unit is 22 inches. Tilling
width can increase to 24 inches by removing
the clevis and cotter pins, sliding each outer
tine out one inch, and securing in this position
with the pins. Forcultivation, reduce the tine
width to 13inches by removingthe outer tines
completely, Figure 5-1.
f
,€
24-inch
2-inch
•
J
Figure5-1:Tinewidthadjustment.
12
Advertisement
