Assembly And Setup; Contents Of Carton - MTD 31A-2M1A731 Operator's Manual

Assembly & Set-Up
3
Contentsof Carton
Two Ignition Keys
One Engine Operator's Manual
One 20 oz. Bottle 5W-30 Oil One Snow Thrower Operator's
Manual
NOTE:This Operator's Manual covers several models. Snow
thrower features may vary by model. Not all features in this
manual are applicable to all snow thrower models and the snow
thrower depicted may differ from yours.
NOTE: All references to the left or right side of the snow thrower
are from the operator's position. Any exceptions will be noted.
Assembly
Positioning the UpperHandle
1. Pivot the upper handle into the operating position making
sure not to pinch the cable in the process, as illustrated in
Fig. 3-1 until it clicks into place.
2. Tighten the wing knobs to secure the handle in place.
See Fig. 3-2.
f
Figure 3-1
Set-Up
Adding Fuel
Refer to the Engine Operator's Manual packed with your snow
thrower for information on adding fuel.
Adding 0ii
Refer to the Engine Operator's Manual packed with your snow
thrower for information on adding and checking oil.