Removing Memory; Replacing Memory - Dell Inspiron 535 Service Manual

Back to Contents Page
Memory
Dell™ Inspiron™ 535/537/545/546 Service Manual
Removing Memory
Replacing Memory
Recommended Memory Configuration
Setting Up Dual Channel Memory Configuration
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
Removing Memory
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Locate the memory modules on the system board (see
4. Press out the securing clip at each end of the memory module connector.
1 memory module connector
5. Grasp the memory module and pull it upwards.
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the connector.
Replacing Memory
1. Follow the procedures in Before You
2. Press out the securing clip at each end of the memory module connector.
3. Follow the memory installation guidelines (see
CAUTION: Do not install ECC memory modules.
4. Align the notch on the bottom of the memory module with the tab in the connector.
1 cutouts (2)
Begin.
Removing the Computer Cover).
System Board
2 securing clip
Begin.
Recommended Memory
2 tab
Components).
Configuration).