Mitsubishi TS-5057 Owner's Manual page 61

i _
Important:
_Important:
aligning colors with the front panel controls
,_Align colors
Press ENTER to select
Red or blue. Then on
each screen press
ADJUST until the
crosshairs appear white.
Press MENU to return to
First Time Set-UpMenu,
_- Red --_
¢
O Oa 1:he front panel of the
P::ojection TV, press the EN-
TEP button and the "adjust
down" button at the same time.
The "Align colors" screen will
appear. Press ENTER to select
a color to align: red or blue.
Use the arrow buttons
(ADJUST i ;, AUDIO --_ ,
VIDEO _-) to align the color you
selected (red or blue) with the
green lines. When they are
aligned, the green line will turn
white.
O Next, use the ENTER button to
select the other color (red or
blue). Use the arrow buttons to
ali_,_ these colored lines with
the green lines.
After aligning both the red and
blue lines, press the ENTER
button and the ":adjust down"
button at the same time to
ret:_rn to normal viewing.
The cross-bar pattern is intended for use only as an alit_ment aid.
It should not be left on fbr a long perio J of time, since it can dam-
age the picture tubes.
The alignment can change over time and may need to be adjusted.
If you notice a change in the color quality of the picture, check the
alignment and readjust as required.
Getting Started 59