Looped Power Cord - Maytag MTW5820TW0 Use & Care Manual

1,
Looped power cord
2,
3,
Remove power plug and yellow strap from machine base to release the rear leveling
system.
Firmly grasp the power cord and pull to completely remove the power cord, cord
restraint, and pin from the rear paneh
Confirm that the power cord restraint (A), and pin (B) are removed.
Looped power cord
Firmly grasp the yellow shipping strap and pull until both ends are completely removed
from washer.
4,
A
B
A. Power cord restraint 8. Pin
[b remove the power cord from the cord restraint, push the power cord in, press TAB, and
then pull the power cord out.
2. Check that two (2) cotter pills were removed with the shipping strap.