Table of Contents
Advertisement
34
TV Code Setting
Your VCR remote control may be able to
operate your infrared remote controlled TV.
If the remote control doesn't operate your
TV now, find your brand of TV on the list
at fight, and follow the steps below to pro-
gram your remote control accordingly.
Point the remote control at your TV and set
the VCR/TV switch to TV position. Then,
press the POWER button. If your TV
comes on, try the other TV buttons (see
page 13). If your TV doesn't come on, or
if the other buttons don't work, go to step
2.
Find the brand of your TV on the list
below, and remember the number to the
right of it.
While holding the TV PRESET button,
press the Number buttons to enter the code
for your TV brand. For example, if you
have a Zenith TV, hold the TV PRESET
button in and press Number buttons 1, 4.
?i.
Try step 1 again. If the remote control works
your TV, you're finished. If the remote con-
trol still _oesn't work your TV, repeat steps
2 - 3 using another code.
There is no
guarantee that the
remote control will
work your TV.
o
!
!
o
.
o
Press the TV button, then the POWER but-
ton,
to see if the remote
control
operates
your TV. If it doesn't,
go to step 2.
Remote Control
Try step 1 again. If
the remote control
works your TV,
you're finished.
If
the remote control
still doesn't work
your TV, repeat
steps 2 - 3 using
another code.
While holding the TV PRESET button,
press the Number buttons to enter the code
for your TV brand.
Find the brand of your TV on this list.
TV CODES
1
MAGNAVOX, GOLDSTAR,CENTU-
"
' RION, CURTIS-MATHES,DAYTRON,
JCPENNEV, MGMMITSUBISHI,
NEC, SAMPO; SCOTt', SYLVANIA,
:'WARDS, YORX
2
MAGNAVOX,:PHILCO,GOLDSTAR,
CORONADQ; EMERSON, KMC,
_ K1-V,'PORTLAND, S HARP, TEKNIKA,
HITACHI,:WARDS _.
3
HITACHI
4 =_iOVC_.
:-
.....
5
MAGNAVOX,_PHILIPS,.SYLVANIA,
6
MITSUBISHI, MARANTZ
7
. PANASONiC,;GE, QUASAR
8
,RCA, GE-
°....
.
9
SAMSUNG
"
"
10
SEARS, SANYO, FISHER
11
SHARP
..
12 - SONY
13
SEARS, TOSHIBA
" . :-
"
14
ZEN ITH
15
PHILCO, RCA, EMERSON, AOC,
JCPENNEY, AKAI,EMERSON,.KTV,
- MARANTZ, MGNMITSUBISH!, NEC,
WARDS
• Although the remote control that comes with :your VCR will work most
Magnavox TVs, as well as many TVs sold under other brand names, it is
possible that the remote control will not operate your TV
• If you had to program the remote control to operate your TV here, whenever
you replace the batteries in the remote control, you will have to program the
remote control again.
Advertisement
Table of Contents
