Quick Set Program - Sears LXI 934.44725590 Owner's Manual

QUICK SET PROGRAM
You may set the TV/VCR to record one program within 24 hours by simply pressing MONITOR button on the
TV/VCR. It is easy for you to record today's TV program.
• QUICK SET PROGRAM can not be programmed by the remote control. This function can only be
programmed from the TV/VCR.
• Power must be on to set the Quick Set Program.
• Clock must be set to the correct time before setting the timer.
• QUICK SET PROGRAM Recording is memorized to program number 8.
In the example below, the Quick Set Program is being set to record. (Current time is 8:00PM):
SEITING TIME from 10:00PM to I1:00PM
CHANNEL CH I0
TAPE SPEED SP
rTl
Insert a blank cassette, or one that you want to record
over, into the cassette corn- (_o,
partment.
If necessary, rewind or fast
forward the tape to the point
you want to start recording.
Press MONITOR button on
the TV/VCR.
NOTES:
DATE o iol WEE
E,,o,,,,t_-_3---
CHANflEL o s
TAPE _EO ,_.P
• You may forward to the next step by pressing VOL-
UME _ button on the TV/VCR.
• When you press VOLUME "_7" button on the
TV/VCR, all selections will be erased and the
TV/VCR screen will return to the initial display
(step [2]).
Press CH _, or _- button un-
til your desired hour is dis-
played.
Press VOLUME _ button.
I - QU_K SETPflOORAM - 1
DATE 0 t01 WED
t
ENO 11ME - -: .... •
CHANNEL EE
TAPESPEED SLP
Press CH _ or _ button un-
til your desired minute is dis-
played.
Press VOLUME _,, button.
- OU_K SET PROGRAM-
031 I WED
ETkJ:IT TIM E "_ _ '_"
EN0 TIME - -: ....
CHANNEL 08
TAPE SPEED Eg.P
Press CH _'_or v button un-
til AM or PM is displayed.
Press VOLUME ^ button.
Repeat steps [3] - 15] to set
the end time.
- QU_K SET PROGRAM -
DATE 03101 WED
END TIME - - ....
CHANNEL On
TAPE SPEED SIP
- O_CK SET PROORAM- 1
o.
TAPE SPEED S!P /
J
Pq
Press CH A or _7 button un-
til your desired channel
number is displayed.
Press VOLUME z_ button. - c_c_ SET PROGRAM- 1
OATE 03101 WED
$TARTTIk_ 1O_O PM
ENO TIME 1 :SO PM
,APE E ,_EO_ ' _
Press CH _ or v button un-
til your desired tape speed is
displayed.
I . o_cK SETPflOORAM -
DATE 03/01 WED
BTARTT_E 1_o FM
ENO TIME It:00 PM
TAPESPE
Press MONITOR button.
Press POWER button to set QUICK SET PROGRAM
Recording. The TIMER REC indicator lights up.
• If power is not turned offand you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV/VCR screen 2 minutes before the pro-
grammed start time.
You must turn off the TV/VCR to activate QUICK
SET PROGRAM Recording.
- 28 -