Table of Contents
Advertisement
TIME SEARCH
The Time Search function makes it possible to quickly advance the tape from any position by entering the exact
desired amount of playback time of the part that you want to skip.
• You must use the remote control unit for the following steps:
• Power must be turned on.
• Make sure that a cassette tape is in the TV/VCR.
In the example below, search the position after 2 hours 53
02
Press MENU button.
-MENU-
1 TIMER PF_GRAMMtNG
2 FtClURE COeCTROI.
3 SETTING CLOCK
4 C_t_NNEL 8lETUP
5 L/b%_UAGESELECT
s TME SEARCH
7 US_ffS SETup
8 CC_ SELECT
Select
item
6
(TIME
SEARCH) using number 6
button.
The
hour
digit
flashes.
rxq
Enter the desired hour with
number button.
Enter the desired minutes
with number button.
• To correct the hour, press DELETE button and re-
peat steps [3] and [4].
• To correct the minute, enter correct numbers using
number button.
• To cancel the Time search function, press MENU
button.
minutes from now.
Press F.FWD or REWIND button. The tape will move
to the specified point.
(.
The time counts down as the
17J_'_*'g_
searching progresses. When
0:00 is reached, the tape will
start
playback
automat-
ically.
NOTES:
• Time search can be set up to 9:59.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this
mode.
• This function is not operative when a cassette tape
is not inserted in the TV/VCR.
• The time will not count down during blank sections
of tape.
TO FINISH THE TIME SEARCH
MODE
Press STOP button on the TV/VCR or remote control unit.
This will delete the selected time.
- 23 -
Advertisement
Table of Contents
