KitchenAid KEBS278D Use And Care Manual page 7

Using Your Oven
Starting an operation
After programming a function, you must
STA_ press START to start the
function. If you do not press
START within 5 seconds of
programming, "START?" will show on the
display as a reminder.
Canceling an operation
CANCEL/OFF will cancel any function,
(single
ovens)
OR
(double ovens)
except for the Clock and Timer
functions. When you press
CANCEL/OFF, the small
display will show the time of
day, or if Timer is also being
used, the time remaining.
NOTE: To cancel the timer
see "Using the Timer" section.
NOTE: You may hear a fan blowing in the
oven even after you press CANCEL!OFF.
This is the cooling fan. It will turn off when
the oven cools.
Changing audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To change pitch and loudness of key tone:
PRESS and hold for 5 seconds
A short tone will sound and "Snd" and "Hi" or
"Lo" will appear on the display. Repeat the
step above to change to the other setting.
To turn on and off all reminder tones
(single or double ovens):
PRESS end hold for 5 seconds
To turn on and off all tones (double
ovens)/to turn on and off key pad entry
tones (single ovens):
PRESS and hold for 5 seconds
STOP I
A short tone will sound and "Snd" and "On"
or "OFF" will appear on the display to tell
you the signals have been changed. Repeat
the step above to turn the signals back on.
Selecting an oven
(double ovens)
To choose the oven you want to use, press
UPPER OVEN/LOWER OVEN.
Finding out which oven is in use
(double ovens)
Press UPPER OVEN/LOWER OVEN. Upper
oven or lower oven information
will be displayed and the outer
oven cavity symbol for the oven
being programmed will flash.
To turn on and off end-of-cycle tones and
reminder tones (single or double ovens):
PRESS and hold for 5 seconds