Using Convect Full Meal - KitchenAid KEBS278D Use And Care Manual

Jsing Your Oven
Burn Hazard
Use an oven mitt to remove
temperature probe.
Do not touch broil element.
Failure to follow these instructions
can result in burns.
9. After cooking, unplug probe.
The probe symbol will remain lit until
you unplug the Temperature Probe.
10. Remove food from oven.
(This prevents overcooking.)
11. Clean probe.
Wash with a soapy sponge and dry
thoroughly. Use a plastic scouring pad
to remove cooked-on foods. You can
also clean the probe in a dishwasher.
Using Convect Full
Meol
(upper oven/single oven/both
ovens on Models KEBS208D
and KEBS278D)
NOTE: These examples are for double upper
ovens only. Other ovens may look slightly
different.
22
Convect Full Meal lets you choose from
among ten preset oven convection cooking
cycles, all using the convection fan. These
cycles store commonly used cooking times,
cooking temperatures, and probe tempera-
ture settings. Convect Full Meal saves you
time by limiting the number of pads you
have to press when cooking at a favorite
cycle. Convect Full Meal also lets you set
your own favorite cycle (either convection or
nonconvection). On double ovens, you can
set two favorite cycles, one for each oven.
=
Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 6 thru 0 in the
"Convect Full Meal" chart later in this
section), insert probe into food. Place
food in oven and plug probe into jack.
2. Press CONVECT FULL MEAL.
PRESS
to select oven
(for double ovens)
PRESS
3. Press desired Number pad.
PRESS
Use the "Convect Full Meal" chart later in
this section as your guide for selecting a
cycle.
NOTES:
• On double ovens, the cavity symbol
flashes to tell you which oven you
are setting.
• You can change the Convect Full Meal
cycle any time before pressing START
by repeating Step 3.